Montgomery Decor

Naturally, if you are not an expert at something it is in your best interest to seek out helpful tips before you actually execute whatever it is you are attempting to do. When you are dealing with something as vulnerable and sensitive as painting a house, it would be very wise of you to do your research before hand so that you do not have to experience a tragic ending to what could have been a happy bragging right.

This is especially true when you are planning an exterior home painting excursion. It is for this exact reason that I have constructed this list of things to consider when planning for an event such as exterior house painting.

Let us begin.

Is The Weather Outside Frightful?

I bet you never thought of this, did you? Well, if this is true for you, do not feel bad. This is the last thing that most people are thinking about when they are planning to paint their home. When you have a project that has a million aspects to it, weather is not a top priority.

Or is it?

Well, considering the weather is actually much more important than you would imagine and here’s why:

• If it rains while you are in the process of painting your home, the paint has a very low chance of sticking and drying properly.
• If you are in an area that suffers from below freezing temperatures then normal paint will not dry properly. It will actually freeze and ruin the whole process.
• If you do live in an area that has below freezing temperatures, then you will need to special order paint that is specifically designed to sustain this type of extreme condition.

So, as you can plainly see when planning an exterior home painting, you will need to be very cautious and aware of what the weather conditions will be like during your designated house painting time frame.

My Home is Transparent!

Have you ever seen a home that appears to be transparent? No, I do not mean you can see through the house! I mean that you can see through the newest coat of paint and see what the previous color of the house was?

Well, this is a much more common error than one would like to see.

So, why does this happen?

The answer to this question has 2 very simple answers.

1. Low Quality Product

The most prevalent cause is that whoever is doing the painting used low grade paint. When you use low grade paint, it does not have the consistency and “thickness”, if you will, to fully cover the previous paint color. Exterior home painting should always be done with quality paint.

The lesson here?

DON’T BE CHEAP! It costs too much to be cheap.

2. Not Enough Coats

The 2nd reason for this “transparency” issue is that the person or persons that painted the home did not apply enough coats of paint to the home. This is a very simple error that can easily be amended; however, it can be quite a hassle to do this after you thought you had a complete paint job.

So, there you have it! These are just a couple of things to consider before part executing an exterior home painting.

If you take these 2 simple things into consideration, you will be a happy camper; however, should you disregard them, you will be a very disgruntled camper with a lot of unnecessary work ahead of you.

More information on exterior home painting and a College Works Painting in your area is just a click away.

Painting the interior of a home is a much more delicate process than painting the exterior of a home. Though, most of the steps are the same, the interior process requires a few extra precautions.

Here we will go through the step by step process followed by most traditional home contractor painting companies. This list, of course, is just a basic outline and some companies will add steps to this process; however, if the company you are looking to hire is planning to leave out any of these steps it may be time to look for a new company.

1. Clear The Path

Obviously, when you are painting the inside of any home it is necessary clear a reasonable path so that the painting crew can have sufficient space to do their job. Typically, this requires that all of the furniture is moved to the center of each room.

Once it has been moved to the center of the room, it will then be covered with Plastic wraps, tarps, or a drop cloth of sorts.

Next, the crew will cover the flooring with drop cloths so as to protect it from paint spillage.

2. Prepare the Surface

This step requires that the home contractor painting crew scan the walls and ceilings. They should fill any cracks or holes, seal any stains, and sand the surface of your walls. This insures that the surface that the paint has a clean and smooth surface to be applied to.

3. Stroke Time!

Now the actual painting begins. The crew will paint as many coats as required to make for a beautiful finish. This, of course, should be to your satisfaction.

4. Have a Look-see

Now it is time for the inspection. Both you and the home contractor painting crew leader will navigate your entire home and be sure that you are thoroughly satisfied for the work you paid for.

5. Clean Up The Mess

Now, for the most exhilarating part of the process; clean up! All floor cloths are removed, all materials are excavated, all messes are cleared, and all the furniture is put back in its proper place.

Before Signing Any Paper Work:

Now that you have this information, take it with you in your search for the best team for the job.

My personal suggestion would be to interview the home contractor painting service owner and ask them if they take care of all of these steps. Get a clear idea of what they intend to do and what charges will be incurred for what services.

Make sure that you know exactly where every last dollar of your money is going. If you are working with an honest company, they will have no problem in mapping out this information for you.

In The Meantime:

Do a lot of research. Speak with a few different companies. Don’t settle for the cheapest. Settle for the company that you think is going to do a rock star job.

I wish you the best of luck and happy searching!

More information on home contractor painting and College Works Painting in your area is just a click away.

It used to be that your choices in paint were confined to the color and the question of latex vs. oil. However, our increasing knowledge of our impact on our environment is changing the face of home painting. The paint that we have taken for granted is bubbling over with volatile organic compounds (VOCs) which are potential carcinogens. The fumes emitted by these substances can last for years after the paint was applied. It is estimated that the air within a house is three times as polluted as the air outside the house.

Today, there is a big movement afoot to produce paints that impact our lives and health a lot less. In fact, we have been returning to the compounds that people historically used to paint their dwellings – limestone, clay, even milk. Recycling paint has become another method of reducing our demand on our environment’s natural resources.

One choice is limestone – good, old-fashioned whitewash. This paint can be tinted various colours and can be used indoors or out – as long as the surface being painted is porous, allowing the lime to sink into the material. Lime allows the material it covers to breathe, preventing the buildup of humidity and eventual damage to the dwelling.

Clay paint is available in many natural colours, plus a few more created with the addition of dyes to the natural color of the base. It imparts an earthy look to the home. It can also absorb some odors, making it a good choice for the kitchen and bathroom areas.

Milk paint is actually made from casein, a protein found in milk, lime, oil and other substances used to tint the mixture. This is a very time-oriented paint, as milk protein spoils just like milk does. Thus, it must be applied within a limited time of mixing it.

There are a number of concerns about “natural” paints. First, they can be expensive to buy and may have a limited time of viability before they become less efficacious when applied. Many cannot be washed or cleaned, necessitating repainting to remove the sight of dirt or marks. This can be circumvented by applying a sealer, but that also means more expense. These paints also tend to wear more quickly than standard paints, thus making the need for repainting more frequent.

There are now companies manufacturing recycled paint. In Canada, the only one is Boomerang Paint (boomerangpaint.com), based in Quebec. Recycled paint manufacturers take in unused paint and combines it to produce a new, stable paint. These paints can come in all sorts of types: latex, alkyd, etc. and are very low in VOCs.

Choosing an environmentally friendly paint will pay off, not only for your environment, but also for you and your family. More and more retailers are offering alternative, healthy paint choices for the home painter. Consider them the next time you need to paint something in your home or your home itself.

Complete Calgary home search: View all Coach Hill real estate, Calgary listings including Signature Park homes for sale. Access photos, virtual tours, neighbourhood info, maps and more at JustinHavre.

Doors are often the few things in the house that are overlooked yet normally abused. They get bumped a lot, they get kicked a lot and they get a lot of dents, if not the most of them. Thus one of the central issues to sliding panel doors is the maintenance. But this doesn’t mean that one has to bend his back over it just to attend to the newer dents on the doors. Sometimes, painting, thus adding some sort of surface protection, could be enough to increase the lifespan of the door.

But how is this done? Let us give you some instructions and tips on painting the doors.

First, handles, mechanism, plates and components that are not really part of the door’s body must be removed. This would not only prevent such components from being painted but would also make the painting process a lot easier as there are no obtrusive things that could avert the painting process.

Second, prepare the wood of the door. Whether it be a new wood or a repainting job, the first thing to be done is to sand the body of the door. Sanding should be in accordance to the grain of the wood. Slight sharp edges must also be rounded off as this gives the door some degree of refinement.

After which, wipe the surface of the door to remove the debris and dust. Also, knotting must be applied to prevent any leaks that could damage the finish later. For cracks and joints, appropriate wood filler must be used.

Third, the actual painting process begins by applying an even coat of primer. Allow the primer to dry and smoothen the surface by using sandpaper. Rub with a clean cloth to remove debris.

Fourth, apply the undercoat. By following the natural grain of the wood of the door, apply one or two undercoats, if necessary. Preferably, the undercoat and the actual paint must come from the same manufacturer to achieve consistency of result. Let the undercoat dry and rub with sand paper. Using a cloth, remove dust and prepare the door for the last coat.

Finally, the top coat. Careful attention to details must be observed. Painting a panel door is not as simple smudging crayon into paper.

There are several panels and areas in the doors. Choosing any one of these as the starting point for the top coat is not really a good idea. It is always best to begin with the top edge of the door, painting it carefully while making it a point not to let the paint run. Then, the side parts of the doors should be painted, observing the same care. After that, coat the panels of the doors themselves using smooth strokes of the brushing while following the grains of the wood. Followed by the area in between the panels, begin with the vertical area then the horizontal area.