Montgomery Decor

It’s become one of the great home theater rivalries…Plasma television versus LCD. Which one do you buy as the showpiece for your best home theater system? Plasma or LCD?

Maybe it’s a guy thing… I’m not sure but when I went shopping for my television, my better half, my gorgeous wife or “she who must be obeyed”… call her what you like, just didn’t seem to care what type of television I purchased, Plasma or LCD, just as long as it produced a good quality picture.

Let’s make some comparisons about the respective merits of either version. When setting up a home theater center the television is the centerpiece so you want to make sure you get this right. I will list what I consider the advantages of either type.

Plasma Advantages

1. Definitely screen size. Plasma tv’s are available in size from 32 inches, all the way up to over 100 inches. Certainly an advantage if you prefer the bigger screens.

2. Viewing angle is an interesting debate. Some say plasma while others say LCD. Maybe plasma “by a nose” but there is nothing in it. LCD’s have improved markedly though and are rapidly gaining the upper hand in this area.

LCD Advantages

1. LCD tv’s are definitely tougher and more durable, not that you’ll be tossing the thing around the back yard! They certainly hold the upper hand in the “durability stakes.”

2. Installation is usually a breeze with LCD’s where plasmas require a little more installation know how.

3.LCD’s are lighter although this could have something to do with the fact they are smaller however, they are also thinner than plasmas. Whether this is an advantage I’m not sure and in the end, it may be up to “the eye of the beholder!”

As you can see, there is not a lot of difference in my opinion.

Life Span

There is always an argument for and against concerning plasma and LCD life span but to be honest, there is not much difference between either version. You could reasonably expect to get 15-20,000 hours use from either television before backlights need to be replaced however, replacing an LCD part will cost you more than a plasma at this stage of the evolution in technology.

Picture Issues

LCD’s are perhaps more consistent in the area of picture brightness during normal conditions of light but under home theater situations, plasma will have the edge.

Pixel issues are again line ball with both plasma and LCD having their for against arguments. Burn-in issues were once a drawback with plasmas but technology in recent years has “levelled the playing field” in this area.

Which Is Best?

I’d rate plasmas as the choice television for a home theater set up. Let’s face it, you’ll more than likely use your home theater to catch up on plenty of movies. However, with technology advancing so rapidly, LCD’s are gaining more and more of a foothold.

What did I buy? Plasma. Why? Because in the end, I got a great deal on a set which was on sale and hard to resist at the price. I’m betting this may ultimately sway your decision as well. And yes, my better half was more than pleased!

Dean Caporella is a professional broadcaster. What television is the best fit for a home theater set up…plasma or LCD? Read this revealing report to find out plus, get the latest home theater tips and tricks at:http://www.hometheaterinfoline.c

So now you have your brand new home theater system components sitting in their boxes in front of you and it’s go time. You have to somehow connect all of these foreign objects together and make it all work. For many people this is a really intimidating scenario, but actually if you follow a few simple guidelines it doesn’t have to be all that difficult. So here are the top 5 tips for home theater wiring installation.

1. This may sound corny but read the manual. I know that there are lots of you folks that prefer to just pick up a screwdriver and dive in, but you cannot believe how much you can mess up by not taking the time here to read the installation instructions through and get a good feel for what you need to do in advance. In fact, you may somehow get the system to work without doing that, but odds are that it will never perform as well as it should simply because a few steps were left out while it was being installed. So save your self the extra grief and just read the wiring installation instruction manual before you get started.

2. Use the correct gauge wire for your installation. Remember that when you have to run wire for longer distances it requires a heavier gauge to be able to successfully transmit the signal. Here is a simple general guideline that you can use: for lengths under 100 feet 16 gauge wire should be adequate, up to 200 feet 14 gauge wire will work and over that you will probably need 12 gauge wire to make sure things work properly.

3. Whenever you are making any kind of home theater wiring installation whether it be from one component to another or from a component to the speakers, make sure that both components are powered off when you connect them. Many is the heartache caused by someone turning on components before making the connections and experiencing high sudden power loads that damage their brand new equipment. Avoid that by always keeping the components powered off as you make wiring connections.

4. Gather your cables and wires together in advance and make sure that they will stretch far enough from each installed component before you begin installation. It’s really frustrating to find out that one of your wires or cables isn’t long enough after you already have everything else set up.

5. A common mistake that many people make when installing their own home theater setup is stacking the components like the receiver, dvd player, cable box and so on, so closely together that they have no room to breathe. Often they will even put them inside a closed cabinet too, which only compounds the problem. So before laying out your system try to think of a way to provide plenty of air flow between each component which will allow it to run more efficiently, last longer, and perform better.

If you plan ahead to set aside plenty of time for your home theater wiring installation, you should be able to get it done with little problem and frustration if you use the tips provided above.